What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 09:21

[image of Common-mode choke]
Now when you have a certain ac resistance, then a current flows in a loop.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Why does everyone hate Ed Sheeran so much?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
eight
Why are Indians so influenced by the Western culture, when the Indian tradition has so much to give?
The bolt then partially travels down the line to your home.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
Why are the bands Smashmouth and Nickelback often used as punchlines?
At one ohm, the resistor has a maximum of 1 watt power.
This is 'the assistant's answer'
2024–10–16 [ OO OLAOYE OYEBODE ]
How does a 45-year-old man get a girlfriend?
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, the voltage could go up to 500 volts, and the fuse will not open up.
Does eating bread before bed make you fat? If so, why?
(Dc diagram shown, AC is similar).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Replace Your Gmail Password Now, Google Tells 2 Billion Users - Forbes
Edit 2024–10.
so, what happens?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
I just cannot wake up early, even if I sleep on time. What should I do?
Barnstars:
This is the picture of an electronic coil of wire wound around a core of magnetic material.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What is it like to use a Fleshlight?
But… the neutral is now “floating” because of the 1 ohm resistance.
There are three different concepts here that are getting confused.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Because the load is inductive, the current lags the voltage.(by a bit).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
A circuit breaker is similar, but is resettable.
These devices are installed between the “hot” and “neutral” and protective ground.
At least they know the answer if they wanted it.
In schematic diagrams this is the symbol for a fuse:
What do you think about Matt Gatz as an attorney general?
But it can get overloaded, and no longer works.
What does a fuse do?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The other is “what does a “fuse” do?”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
nine
This is where the MOV conducts again, and dissipated the energy.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
One is “what exactly is in a ‘surge protector’ ? ”
First Sentence:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The third is lightning and “how it gets conducted into a home.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
the problem then depends on "how fast does the fuse operate?".
An AC voltage/ current source, and an ac inductive load.
He then describes Rainy Season and Lightning.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but I think this circuit , shows a few more pieces.
Here is a simplified AC power diagram.
It seems Mohan does not understand the difference between a comment and an Answer.
One
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It also is a device that limits the change in current flow.
What is lightning?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The MOV will conduct when the voltage exceeds 50% of line voltage.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
a photo is worth a thousand words.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–10[John johnson John Johnson ]
what exactly is a ‘surge’ protector?
I post the exact comment here.
Upvotes:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
For this case there are devices called Metal oxide varistors (MOV).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There are two important concepts here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
He then describes the function of a fuse.
A fuse is a non-resetable over current circuit protector.
[old diagram got deleted by accident]
He then asserts :
These are simplified answers to the original question, and does not change anything I wrote above.
This one hit behind the barn.
but this device (an Inductor) … impedes the rapid changes in the current.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This device then solves the entire problem.